65 Mustang Distribution Block fitting size

[65coupei6]

I will be making new lines from my master cylinder to the distribution block. Anyone know what size fittings it takes?

 

[Jonk67]

Can't help you on the size exactly as I have a '67 and know the block is different. One tip though, check out your local NAPA, bring the valve and MC with you. They have an assortment of short lines with 2 different fittings on each end so you may be able to attach from the MC to valve without having to cut/flair a different fitting on. Also, the polymer coated lines I got at NAPA were the easiest lines I've ever bent, I started with a bending tool and then used a 3/4" socket to bend this tight loop without using adapters which is just another connection to leak:

Jon

 

[monkeystash]

3/16 I believe.

 

[SELLERSRODSHOP]

the lines are 3/16, but the fittings are 3/8x24. if by chance yours has a larger fitting in one of the ports, it will be a 7/16x24. my 69 4 wheel drum block was all 3/8x24.

i bought all of my fitting for my new system from this place:

http://brakeconnect.com/tube-nuts-male/ ... -tube-nuts

 

[65coupei6]

Thanks guys. I will try Napa and the brakeconnect.com

I was going to buy this :

http://www.speedwaymotors.com/3-16-Inch ... ,1990.html

and these:

http://www.ebay.com/itm/310345543691?ss ... 1423.l2649

 

[Ponyman66]

Though off topic I just gotta say, that's some really nice work Jon!! :thu