• Hello there guest and Welcome to The #1 Classic Mustang forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Air cleaner to Oil filler tube connection Help

B

boss1pny

New Member
OK...I have placed an open element type air cleaner on my 302 engine...it is NPD part number 9600-1, it has a nipple opening on the base (1/2 inch in diameter) and my oil filler cap and tube comes with a breather cap elbow (NPD 6767-1) and that elbow does not fit into the base of the air cleaner...I can not find any elbow to attach the oil cap to air cleaner tube to the air cleaner,....any suggestions or help... :wtf Thanks
 
The nipple on the base may be for the choke stove piping on the passenger side. The input into the manifold comes from the clean air side of the air cleaner housing.
 
I believe you can find a rubber hose that is pre-shaped and cut the length to fit. I had a like issue some time back and just visited an Auto Zone with the parts in hand to find a fit. Use a hose clamp to secure it if it is a bit loose.
 
You must log in or register to reply here.
Back
Top