AzPete
Well-Known Member
The other hood I got with the '66 is a '67 style double scoop all fiberglass hood. I started looking it over good today. In the area of the scoop, it has some cracks. Looks like pressure was applied on the top of the scoop. All on the under side, three go forward from the scoop on the main hood. One at each corner and one in the middle of the scoop opening. They are between 2 and 4 inches long. The fourth is on the underside of the scoop itself, about 3 inches long going towards the rear, at the center of the scoop. When pressure is put on the area, I can see the cracks open but nothing shows thru on the top side.
What would be the proper procedure to repair them with the least cost?
What would be the proper procedure to repair them with the least cost?