351c Weiand Xcelerator 4V intake for 2V heads

[DougG69]

Thought I would post this up to see if there's any interest. Just like the title says 351c Weiand Xcelerator 4V intake for 2V heads. I bought it new around '03.

Will include spacer/plenum divider.

Pulled it when I installed an RPM Air Gap. It could use a little cleaning, but otherwise fine.

$120 + shipping.

Thanks for looking.

P.S. - I have email notification enabled, just reply here, I'll get it

 

[scedd]

Great manifolds never go out of fashion.
In 1981 i had an XA Falcon Coupe (Think Mad Max) running a 302 Cleveland with this manifold, a 600 Holley double Pumper, 62cc Closed chamber 2V heads and a Sig Erson Hi Flo 2H cam, toploader and 3.55 diff.
That thing ran a 12.6 quarter and revved to 8,800 rpm, at least until it spun a bearing!!

 

[DougG69]

Great manifolds never go out of fashion.
In 1981 i had an XA Falcon Coupe (Think Mad Max) running a 302 Cleveland with this manifold, a 600 Holley double Pumper, 62cc Closed chamber 2V heads and a Sig Erson Hi Flo 2H cam, toploader and 3.55 diff.
That thing ran a 12.6 quarter and revved to 8,800 rpm, at least until it spun a bearing!!

Coincidentally, this manifold was feeding some Aussie 2V heads as well.

Butt dyno can't tell the difference from this one to the new RPM, but it's not doing any good sitting on the shelf...