• Hello there guest and Welcome to The #1 Classic Mustang forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

67 bucket seats

B

bwross

Member
So I have a dilemma; I have a pair of 67 buckets that have been recovered by a previous owner but he didn't put the back adjustment bolts in. I've looked at the seats in my second Mustang and have a good general idea of where the bolts should go but the question is what am I screwing into? Is there a threaded plate inside the cover, or a nut, or a.........?
If anyone can provide the information it would be appreciated. Also, if anyone has pictures, you know what they say about a picture being worth a thousand words.

thanks to all,

Bruce
 
My seat still has the upholstery on it, but the part the stop screws into is just a flat section of the pipe-like piece of the frame. You can just feel for the flat and poke around the center of the flat section with an awl. The hole should be right there.

Frank
 
You must log in or register to reply here.
Back
Top