• Hello there guest and Welcome to The #1 Classic Mustang forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Front wheel stud dimension

66gt350

66gt350

Active Member
I need to put in longer wheel studs up front. There's not enough showing out of the lug nut. I didn't get them pressed out last night to get the dimensions, so I could order some today. I'm running a set of SSBC disc brakes up front on 66 fastback. Does anyone know the length, knurl dimension, and knurl length on the front end?

Thanks
-rob
 
I assume the wheel studs are removable? I'd measure them myself before I relied on any answer from here. If they're aftermarket studs with the SSBC rotors there are too many variables to get an accurate answer from any of us.

The knurl diameter is likely 0.674, but I'd pop one out and double check before I bought replacements.
 
Thanks Dave. Are you saying that you guys give out bad information??? :lol
I just called SSBC, and the tech didn't have the exact dimension, but they are the stock wheel lug size. I was hoping to get some ordered today, but I guess I'll be pressin' one out tonight and doing a little measuring.

-rob
 
Are you saying that you guys give out bad information???
Click to expand...

Not at all, it's just that there are usually enough variables that it's impossible to give the correct answer. I wouldn't even trust the SSBC tech.

You have to remove them in order to replace them anyway.... pull one out and measure it.
 
You must log in or register to reply here.
Back
Top