As I get ready to start working on mine again,I'm starting a whiteboard list out in the garage of what I'd like to accomplish. One of the things is swapping out the old fuse block and putting in the more modern type blade fuses. Has anyone done this? Can it be done with the old harness or will I need a new harness?
-
Hello there guest and Welcome to The #1 Classic Mustang forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Fuse Panel
- Thread starter KTJMcG
- Start date
AzPete
Well-Known Member
You could use a new or old harness. Just splicing the wires for the proper circuit to the proper size fuse in the new block. One thing to consider is the new block may have more openings than the old.....and you may want to add some circuits that are currently not there.
Nothing wrong with a good, clean original fuse block if you are running pretty stock electrics in the car.
Midlife does a nice restore job on old fuse blocks too.
Nothing wrong with a good, clean original fuse block if you are running pretty stock electrics in the car.
Midlife does a nice restore job on old fuse blocks too.