Need a picture...Summit Carb w/PCV Plumbing

[Sacbill]

Has anyone got their Summit Street and Strip carb set up with PCV plumbing from the valve cover to the PCV snout on the front base of the carb? Just curious if you could post a picture of this. Right now, I'm running it from the valve cover to the back of the carb (the power brake port). TIA!

 

[Sluggo]

Has anyone got their Summit Street and Strip carb set up with PCV plumbing from the valve cover to the PCV snout on the front base of the carb? Just curious if you could post a picture of this. Right now, I'm running it from the valve cover to the back of the carb (the power brake port). TIA!

Yes I do.

 

[Sacbill]

Yes I do.

Thanks! Looks like you're using standard vacuum hose and letting the end at the PCV unit "bend naturally?" (as opposed to a molded piece)

 

[TB350]

Make sure you use hose rated for pcv use so it doesn't collapse under vac and that won't be affected by the oil and fuel vapors running through it. kip

 

[Sluggo]

Thanks! Looks like you're using standard vacuum hose and letting the end at the PCV unit "bend naturally?" (as opposed to a molded piece)

It's fuel hose IIRC, you can buy PCV valves that have a 90 also if you have trouble keeping it from kinking.