• Hello there guest and Welcome to The #1 Classic Mustang forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Shifter alignment with transmission prnd21

M

Michael Roberts

New Member
I have replaced a six with an eight, c4 with an fmx. I know somebody has designed a bracket to adjust for the misalignment problem but I can't find it, can anyone help. Thanks
 
I personally never had an FMX but they were a factory available transmission. Wouldn't it be the same shift lever? Unless it came out of a column shift car or something like that... I did put a C6 in my 67 when I swapped the 289 for a 460 and the C6 was from an F150 with a column shift so it was longer and upside down for the Mustang floor shifter. Too my surprise the C4 shift lever was interchangeable with the C6 so I just put he C4 lever in the C6 and flipped the right way during installation for the floor shifter. Again I have no idea if any of this is similar with an FMX.
 
You must log in or register to reply here.
Back
Top