thinking of upgrading the front strutrods on 69 mach 1 what would be recommended for street use take in consideration the roads in my city of glasgow u.k are not the smoothest.There have been about 4 horror stories about broken strut rods in the mustang club u.k so an upgrade for me is amust.
-
Hello there guest and Welcome to The #1 Classic Mustang forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
thinking of upgrading the front strutrods on 69 mach 1
- Thread starter GT350
- Start date
Fast68back
Guest
Street or Track!
http://www.streetortrack.com/Adjustable-Strut-Rods-c-464.html
http://www.streetortrack.com/Adjustable-Strut-Rods-c-464.html
Jonk67
Well-Known Member
I've read a lot of good things about the SorT ones above and ORP's, may be the same product?:
http://www.opentrackerracingproducts.com/strutrod/
I went the DIY route and made my own but haven't tested them other than rolling it in/out the garage!
I ended up using bigger clevis' from the same supplier, CRC, as my '67 strut rods were thicker and I didn't want to machine them smaller.
http://dazed.home.bresnan.net/adjustable
Jon
http://www.opentrackerracingproducts.com/strutrod/
I went the DIY route and made my own but haven't tested them other than rolling it in/out the garage!
I ended up using bigger clevis' from the same supplier, CRC, as my '67 strut rods were thicker and I didn't want to machine them smaller.
http://dazed.home.bresnan.net/adjustable
Jon
A
Anonymous
Guest
The adj strut rods that Shaun sells (Street or Track) are da BOMB!! I really like them.