Welcome to the StangFix member number 1000!
fd
fd
-
Hello there guest and Welcome to The #1 Classic Mustang forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Welcome RacerX
- Thread starter FordDude
- Start date
A
Anonymous
Guest
Hmmmm, RacerX...let's hope he drives something other than a PT.
Hi,
I usually go by RacerX and found the login was still available here as well. I have a corral of mostly early mustangs in various stages. I have also recently acquired a 66 Kirkham Cobra project. My latest build I'm working on is a 65 Convertible that was abandoned by a restoration shop near Houston (I guess he got too deep). But actually he didn't get deep enough. I first sent it to a sandblaster and found out just how much I had to remove of the swiss cheese sheetmetal. I've cut off all the bad panels and am now in process of putting in the 1 piece floor, left rear frame rail and transition pan. Also doing a complete brake overhaul on a 73 convertible 351C car we picked up on Mothers Day 2009. I mean complete as I've pulled axles, backing plates and front brakes down to the spindles. It's a 116K mile car. We are the 3rd owners and I'm getting it ready for springtime driving. It was sitting in a barn for over 20 years before we bought it.
Anyway, enough about me. Perhaps I'll get some pictures posted later as time permits.
I work in I. T. for a living, married with 2 kids, 1 in his first year of college.
Later. Folks.
See you on the board.
I usually go by RacerX and found the login was still available here as well. I have a corral of mostly early mustangs in various stages. I have also recently acquired a 66 Kirkham Cobra project. My latest build I'm working on is a 65 Convertible that was abandoned by a restoration shop near Houston (I guess he got too deep). But actually he didn't get deep enough. I first sent it to a sandblaster and found out just how much I had to remove of the swiss cheese sheetmetal. I've cut off all the bad panels and am now in process of putting in the 1 piece floor, left rear frame rail and transition pan. Also doing a complete brake overhaul on a 73 convertible 351C car we picked up on Mothers Day 2009. I mean complete as I've pulled axles, backing plates and front brakes down to the spindles. It's a 116K mile car. We are the 3rd owners and I'm getting it ready for springtime driving. It was sitting in a barn for over 20 years before we bought it.
Anyway, enough about me. Perhaps I'll get some pictures posted later as time permits.
I work in I. T. for a living, married with 2 kids, 1 in his first year of college.
Later. Folks.
See you on the board.
70_Fastback
Hell Bent for Speed
Welcome to da 'Fix.