Havok1
Member
So, I'm working on the front suspension and brakes. I was able to get some 2005 rims that I'd like to use. The front brake set-up is off a 71. When we were doing a fit test of the rotor to rim before putting the brakes on the car, we noticed a problem.
The spindle hub bumps right up to the rim which means the spindle cap will protrude through the rim which in turn will make it impossible to use the rim ford cap. Should I be looking a different rotor? How can I get these rims to work?
The spindle hub bumps right up to the rim which means the spindle cap will protrude through the rim which in turn will make it impossible to use the rim ford cap. Should I be looking a different rotor? How can I get these rims to work?