I got my clutch pedal pad and finally the correct stainless trim. I pulled the pad out of the box and something didn't look right. There is a lip around the sides and bottom of the pad, and its obvious after the stainless trim is installed. It doesn't really look like a mold issue, as it has a nice clean line. Look at the pics and let me know if yours is like this. The lip isn't there on the top because the stainless trim bends around the back of the pad like it does on the brake pedal. The bottom of the pad has two slots and the trim fingers sit in those.
I'm planning on cutting this excess off with a razor knife so that it looks like it should after the trim is installed, but I'd like to make sure it isn't supposed to look like this.
I'm planning on cutting this excess off with a razor knife so that it looks like it should after the trim is installed, but I'd like to make sure it isn't supposed to look like this.
Last edited by a moderator: