Ricks 70 stang
Member
Almost Finished
-
Hello there guest and Welcome to The #1 Classic Mustang forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Favorite "Project" picture of your car
- Thread starter Fast68back
- Start date
Ricks 70 stang
Member
The pics were big so I reposted
The lowest points of my project.
Flying to the USA to rescue my project car and parts. If you look closely you'll see Daune striking a pose.
Doing all the work I had paid for but was never done.
And the High point
and by far my favourite pic so far.
Flying to the USA to rescue my project car and parts. If you look closely you'll see Daune striking a pose.
Doing all the work I had paid for but was never done.
And the High point
and by far my favourite pic so far.
Last edited by a moderator:
34isgreat
Member
Amber the day I pulled her home. Big day for my family, my twins came with me they were so excited. The second pic was taken the day my wife said I could buy Amber, also a good day!
Don't think that I have a favorite...except this one where I could say mission accomplished, LOL!
Honestly, I am not that much of a shutter bug and when I was busy working on things I wasn't bothering with taking pictures other than to document how things went together.
Here's what I started with under the hood though almost four years ago. It ran when I bought it but if you sat and idled for too long you would have one heck of a cloud of smoke behind you, LOL!
Painting the bay and before the new motor went in
With the new motor, right after I changed to the new valve covers but still had the old wires that were cut for the old wire looms but pretty close to as it sits now
Before picture of the fender apron / core support
Metal cut out
Done and ready to put the fenders, bumpers, etc back on
Honestly, I am not that much of a shutter bug and when I was busy working on things I wasn't bothering with taking pictures other than to document how things went together.
Here's what I started with under the hood though almost four years ago. It ran when I bought it but if you sat and idled for too long you would have one heck of a cloud of smoke behind you, LOL!
Painting the bay and before the new motor went in
With the new motor, right after I changed to the new valve covers but still had the old wires that were cut for the old wire looms but pretty close to as it sits now
Before picture of the fender apron / core support
Metal cut out
Done and ready to put the fenders, bumpers, etc back on
Last edited by a moderator:
janschutz
Corn Hauler
On my wife's Mustang
My old Drum brakes
Upgraded to Factory disk
On my driver: The Original engine
My 351W
My old Drum brakes
Upgraded to Factory disk
On my driver: The Original engine
My 351W
Last edited by a moderator:
blu67
Well-Known Member
Badass70
Member
this was about midway through last year almost ready for primer.. ah i miss all that work!
