toddwallace
Member
I replaced my clutch this weekend and can't get it back together. I put the clutch and pressure plate on the fly whell. Put the bell housing on the clutch and put the clutch fork with the throwout bearing on. All seemed good. Stabbing the tranmission, I can get the top bolts on, but cannont get the bottom bolts on. I have moved and pushed... Jacked it up, jacked it down.. took the cross member on and off.. I cannot get it on.... Any idea
The second problem is that car has no electrical power. I unplugged positive and negative when I pulled the starter.. Thought I was going to have to pull the fly wheel, but it looked fine. put the starter back on and connected positive and negative and everything was still dead. I noted the wire harness pulled from the firewall and plugged it back in.. Still no power.. No starter.. no radio... no nights.. I put another battery to make sure it was not dead.. same thing..
Any ideas??
The second problem is that car has no electrical power. I unplugged positive and negative when I pulled the starter.. Thought I was going to have to pull the fly wheel, but it looked fine. put the starter back on and connected positive and negative and everything was still dead. I noted the wire harness pulled from the firewall and plugged it back in.. Still no power.. No starter.. no radio... no nights.. I put another battery to make sure it was not dead.. same thing..
Any ideas??