Mach1 Driver
Well-Known Member
From the diagram above. Could that wire diagram be more annoying? It has 297 and 16 for the same wire.
Last edited:
-
Hello there guest and Welcome to The #1 Classic Mustang forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
66 Mustang pink resister wire
- Thread starter tarafied1
- Start date
From the diagram above. Could that wire diagram be more annoying? It has 297 and 16 for the same wire.
tarafied1
Well-Known Member
excellent! thanks I will look for that
tarafied1
Well-Known Member
I found the bullet connector red/green wire. They had another factory wire plugged into it. Not sure what it did. Anyway, now everything works like it's supposed to! The ignition anyway...
There's only two other male bullets that could possibly reach that point: the input into the wiper switch, and a ground wire for the constant voltage regulator on the back of the dash cluster. Now then, there's any number of possibilities for accessories...
Glad you got it squared away! Consider yourself to now be a rocket scientist!
Glad you got it squared away! Consider yourself to now be a rocket scientist!
tarafied1
Well-Known Member
wiper and gauges do not work so it could have been either of those! It was hard to see the color(s) but looked like a black with red stripe?
That would be the for the backup lights. The male bullet plugs into the 3 prong connector (yellow or black) that comes out of the fuse box.