• Hello there guest and Welcome to The #1 Classic Mustang forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Another new brake system

Shaun

Member
ST13X11-4P-ALUM3_small.jpg


ST13X11-4P-ALUM2_small.jpg


Here is our latest brake system. Part # ST13X11-4P-ALUM. It features a 13" x 1.1" 1pc directional curved vane rotor, 4 piston forged aluminum caliper in either bright red or gloss black powder coat. Direct bolt on to 65-73 DRUM spindles and will fit under some 16" and most larger wheels. Please visit our website for more information and to download a wheel fitment template.
 
Your title should read "Likes pouring salt in wounds"




:yah
 
Looks nice Shaun. Have you ever thought about coming out with a bracket to adapt the hydro-boost setup into our cars?
 
"Grabber70Mach" said:
Looks nice Shaun. Have you ever thought about coming out with a bracket to adapt the hydro-boost setup into our cars?

All the systems we produce work so well manual I've never looked into it to be honest.
 
Mark,

You may want to sheild your eyes...

ST13X125-2PC-4P-ALUM2_small.jpg


ST13X125-2PC-4P-ALUM_small.jpg


Another bad ass new brake system, part # ST13X125-2PC-4P-ALUM. This bad boy features a huge 13" x 1.25" custom designed rotor mounted to a lightweight, high offset aluminum hat. This enables this system to fit under a 17" Torq Thrust II style wheel without wheel spacers.

The forged aluminum 4 piston caliper is so radially compact this system also fits some 16" wheels.

By maximizing the size of the aluminum hat and minimizing the iron rotor ring to only the pad swept area, we've reduced the weight of the entire rotor/hat assembly to only 15lbs per side. That is 3lbs lighter than our 13x1.1" one piece rotor! Check our website for more information, pricing and to download a wheel fitment template.
 
Back
Top