Bunch of 65-70 and SBF Parts

[68stang289]

My funding to finish my Mach has recently been limited due to the $3k+ I just had to drop for a bar review course (thanks for the wallet rape yet again law school) so I could use a few extra bucks if anyone is interested in any of this stuff. I'm open to offers on all of it, just would like to see it out of my garage. I have pics of everything but will be leaving town later this afternoon for Orlando for the 'Canes bowl game so if I don't respond right away that is why. Here's the list:

1965, 66, 67, 68, 69 Ford 289/302/351 Water Pump Pulley - $10 $5
This came off of my 1968 Ford Mustang 289. Should fit any 1965-69 Ford 289, 302 or 351 motor. This is a single grove pulley. Part number is C8AE 8A528F. It is in great shape.

New Ford Racing 289/302/351W Double Roller Timing Chain - $55
I picked this up new for my 1968 Ford Mustang 289 and never installed it. It came from Cloyes but has Ford Racing number M-6268-B302. It is brand new in the box with instructions. This is their race version where the cam sprocket is made from steel for maximum competition engines. Summit and Jegs sell these for $86 so save some bucks!

1969/70 Ford Mustang Driver Side Racing/Sport Mirror - $50 $35
This came off of my 1970 Ford Mustang Mach 1 (will also fit 1969). The car was painted along with this mirror and it turns out I had two drivers side sport/racing mirrors that were painted so this one must go. It is in perfect shape. The glass is good with some normal very light minimal scratches in it (nothing major and it's not noticeable unless you are looking for it). It is currently disassembled. It doesn't have the remote attached but I have the remote linkage thing that I can throw in.

1969/70 Ford Mustang Quarter Panel Extensions - $30 DEAL PENDING
Pair of 1969 or 1970 (I believe they should fit both years, they will fit 1970 for sure as that's what they were taken off of) Ford Mustang Quarter Panel Extensions for a fastback but may work for both coupe and convertibles as well (please double check this before purchase). These have been media blasted clean and primed to prevent any additional rust. They are in very good shape overall. The passenger side has some rust damage in the lower portion of it that has gone through. The drivers side has a small dent and some holes in the grove where the bumper would fit into. I was told it's fairly easily repairable.

1969/70 Ford Mustang Deluxe/Mach 1 Door Panel Lights - $25 $15
Pair of 1969 or 1970 Ford Mustang Deluxe/Mach 1 Door Panel Lights. There is some pitting on the chrome but the lenses are in fantastic shape. These would be perfect for a driver quality vehicle.

1965, 66, 67, 68 Ford 289/302 2 Grove Crank Pulley - $20 $10
Took this off of my 68 289 Mustang to install a 3 grove pulley. This is two separate one grove pulleys that bolt together. They worked great together and I had zero problems. Casting number says C7OE 6A312C. In great condition. Should work for any 65, 66, 67, 68, or 69 Ford Mustang with a 289 or 302 or any Ford 289 or 302 motor. Please ensure proper fitment.

OEM New 1965, 66, 67 and 68 Ford 289 Crankshaft Harmonic Damper/Balancer - $70 $50
I picked this up for my 1968 Mustang 289 and ended up selling the car before it was ever installed. It has Ford stamped into and is brand new. The number listed on it C82E6316 B1 1200. Should work for any 289.

1969-1970 Ford Mustang/Cougar Console Ash Tray - $5 $3
Ash tray for a 69-70 Ford Mustang or Mercury Cougar Console. In great shape. The chrome around it is in nice shape. It needs to be repainted and the inside of it cleaned out a little bit. Otherwise in great shape.

70 LH and RH Fender Extensions - $30 $20
These are off of a car that was a driver before. They have some dings in them but it looks like they could be worked out by someone.

Like I said, everything is open to offer. I really didn't take the time to see what everything goes for used so if I'm off on my prices please let me know. Just looking to put some extra parts on my Mach or some extra cash in my pocket for my last semester. Thanks guys!

 

[68stang289]

Just found some more stuff...

Grant Steering Wheel Kit - $10?
It looks like it's parts from 2 left over kits but I think everything is there for two full kits. $10?

70 Front Drum Brakes/Spindles - Offer?
I did a disc brake conversion up front on my car so I have these off of a 70 Mach. It's everything from the spindle to the drum. I'm pretty sure there are new shoes for the drums as well but I could be wrong. They're in good shape, the drums could probably use a turning but if you toss me an extra 20 or 30 (I forget how much the shop here charges now) I can have them turned before I ship them out. They are the larger 11" (I think?) drums that have the large fins on them. Make me an offer?

70 Hood Molding - $5
Has one section on the passengers side where it was scuffed up pretty good. Otherwise in pretty decent shape. Could probably clean up decently.

69/70 (?) Fastback rear window boomerang - $10
This is the drivers side rear window boomerang that came off my 70. The two pins are still attached at the bottom and the chrome is in good shape. No pits to speak of but the chrome does exhibit some spider webbing on the lower part. Not noticeable until you are up close. I'm happy to send out a picture if it is helpful.

1967, 68, 69, 70 Ford Mustang Steering Box/Gear - $60 SHIPPED
Took this off of my 1970 Ford Mustang Mach 1 with manual steering. Should be a 16:1 ratio. Has part number C7ZR3550A, 9K29 and the tag reads SMB K 0A21B. It was in good working order prior to taking off. This price includes shipping to your door!

 

[68stang289]

Well the Florida Board of Bar Examiners just raped my wallet for a second time so my Mach is on hold indefinitely while I try to rebuild the coffers from the $4k it just cost me to sit for the Florida Bar so EVERYTHING MUST GO.

No reasonable offers will be refused!

I also found a drivers side boomerang that was extra. It's in really nice shape and the chrome looks real nice. Asking $25 for it.

 

[68stang289]

What is left has been updated. I'm leaving to head back to Miami for classes on Sunday and I will try my hardest to bring some of the stuff with me so I can continue to try and sell it. If not, it may take an extra day or two to get shipped out because I would have to have my dad package and mail it. Again, most everything is open to offers!

 

[68stang289]

Added a few things and updated the prices, some of which I cut in half. Not looking to make a killing on this stuff, just to get rid of it to help pay some law school bills. I am still open to offers. Pictures upon request (or if I get bored in class I may try to link some up).

 

[c6fastback]

Send you an email .

Mike

 

[miketyler]

pics might help

 

[68stang289]

Sorry, been out of town. I will work on getting them uploaded now.

 

[68stang289]

Pictures have been updated. If you would like any additional pictures just drop me a line!

 

[jimsmustang]

IS THE WATER PUMP PULLY .CHAIN AND SPROCKETS,DRIVERS MIRROR,CRANK PULLY AND HARMONIC DAMPER STILL FOR SALE,WOULD YOU SHIP TO ENGLAND
JIM

 

[68stang289]

Yes they are. I will drop you a PM.