front suspension

[Anonymous]

Chit, it raises the car back up in the front... :roulette Im goinna have to think about this one. o :lol

:lol :lol :lol :lol Just put an air ride setup on your car and be done with it........start calling you
Sky Chief :lol :lol :lol :lol :lol :lol :lol

 

[lethal289]

Is that an Indian thing? :lol :lol Maybe from your prairie? Thanks for the new title d bag o

 

[Anonymous]

Yo Chief,

I didn't do it, but it sure is funny :lol :lol :lol :lol :lol :lol :lol :lol

 

[hivewax]

If your moving the spring perch outward/inward, the holes will be spaced farther apart, how is the perch bolts going to fit in the holes?

 

[Opentracker]

[member]

If your moving the spring perch outward/inward, the holes will be spaced farther apart, how is the perch bolts going to fit in the holes?

On our arms the 2" forward and 1" backward move use a double roller with a wider bolt hole spread (custom chromoly shaft). The 1" perch move works with the stock bolt hole spread. I should have clarified "special double roller" .

If you wanted to move that coil over set up out 2" or 1" back, you would have to fab up a bridge of some kind. It wouldn't take much really, a couple of brackets welded to the arm would work.

You could move it 1 - 1 1/4" out with the stock bolt hole spread.[/member]

 

[dhouse]

i went to the local dealer for qa1 and talked to them about using a coil over up front with the stock upper... we are going to check the stock set up and see what we have to do.... ill keep everyone posted