Sluggo
Active Member
Why you have to send me that picture? :voodoo
What is your opinion of this?
What is your opinion of this?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Hello there guest and Welcome to The #1 Classic Mustang forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
"68EFIvert" said:In my opinion there needs to be something that breaks up the colors. A small graphic or at least a pin stripe. If you do that then I say #1. If you don't want to do a 3rd color I stay stay with a solid and add the Mach 1 stripes.
"AzPete" said:Well, I gotta be different. I like the bottom one. I like the two tone for sure and I like how the MACH1 stripe tones down the larger side panel.
Midlife...you blind.....?
That's kinda neat, like the Turlinga Trans-am Mustangs-ish (and +1 on the 03 Mach1 wheels)"Sluggo" said:If I was to do either I would do the edge of the black like the normal hood black out. I'd leave about 3/4 inch of orange around the periphery then a 1/8 inch stripe 1/4 inch from the edge of the black.
I threw this together in a hurry just for an example. Color is not right and the selection was a bit rough.