Good morning all,
So I figured I would throw this out there. I found this Miller welder on the Sears website, thought I would put this out here to see if I could get some welder feedback. My welding skill level is very basic as in I used come out of my office to help TIG weld a little if we had no one else to do it. I did okay but my specialty was starting the fling the stainless rods across the shop into the wall in the tightest group contest.
http://www.sears.com/shc/s/p_10153_12605_00920580000P?mv=rr#
Thanks everyone
So I figured I would throw this out there. I found this Miller welder on the Sears website, thought I would put this out here to see if I could get some welder feedback. My welding skill level is very basic as in I used come out of my office to help TIG weld a little if we had no one else to do it. I did okay but my specialty was starting the fling the stainless rods across the shop into the wall in the tightest group contest.
http://www.sears.com/shc/s/p_10153_12605_00920580000P?mv=rr#
Thanks everyone