Where do this wire go? 1967 A/C convert.

[mmw68]

I forgot to label this wire when I pulled the old engine. I've looked at all the digrams, but can't seem to locate what this goes too. It runs all the way into the dash, but I can't see where it goes.

I think it might be for the A/C? Maybe the convertible switch?

THANKS! - Mark

 

[Mach1Rider]

Looks like the power feed for the top motor.
Should be connected to the batt side of the sol, After you replace that stud bolt with one that is properly insulated.

 

[mmw68]

Iam not sure why all the older cars use those stud bolts, it's not like it's a fuseable link is it?

THANKS! -Mark

 

[B67FSTB]

Looks like the power feed for the top motor.
Should be connected to the batt side of the sol, After you replace that stud bolt with one that is properly insulated.

Yep , seems to be that power feed for the power top motor.
This feed goes to the power top switch IIRC.

 

[Mach1Rider]

Iam not sure why all the older cars use those stud bolts, it's not like it's a fuseable link is it?

THANKS! -Mark

They are used for a connecting point for power, there is no fuse link.
The older cars only have so much room on the Batt side of the sol for wires and this provided a simple connecting point for extras.