• Hello there guest and Welcome to The #1 Classic Mustang forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Working on a new product.

SELLERSRODSHOP

Well-Known Member
Now that I have this 65 & something to work with, I’m working on a new shock tower reinforcement kit for the 65-66 cars. So far it’s turning out really good, much improved from that kit that was on the market a few yrs ago that looked like a bunch of bent straps. On the hunt now for a pair of old 65-66 shock towers& the rail sections underneath the towers for a bench top fitment/ welding jig. These will pretty much cap the whole lower part of the tower once the final adjustments are made.

not the greatest pics but all I have right now. This is a pattern set made out of scrap diamond plate so the bends aren’t the greatest, but will be better when transferred to regular steel stock. Still have to transfer the back to pieces from cardboard to steel, but this should give a good idea. EE0D132E-116A-40E4-847C-30437BD6292B.jpegD90F5C49-1ECB-40B8-BD0B-F37B8245E5A4.jpeg83FFF096-3028-49CE-BD40-1B6A1695FCAC.jpeg1974AFCC-83EF-4627-8054-F284AA714DF6.jpegThoughts?
 
Interesting. Good luck with it.

I did not go this route with my car. I did a bit of extra welding to the stock metal and other than torque boxes that was it. So far so good. This does remind me to keep an eye on things. If I did it again I would surely go this route simply because of the ease and piece of mind it would give.
 
John was after me to develop something a few yrs ago, but didn’t have a car available with the motor out to pattern, then the move to the mountains etc. Got to thinking about it a couple weeks ago while fiddling with this 65 I picked up & figured now was the time to do something.
 
First set is in CA now. Hope to get some feedback if any adjustments need to be made. Parts fit really well on these towers. Also have lower control arm boxing plates on the list. Last pic is the initial steel patterns with some epoxy on them. Made a few adjustments to these, but gives a good idea of what all is there.



254E59DB-3190-466C-9439-CBED6C62725C.jpeg

C305B4E4-CDBA-4DC2-A579-609EA7712F7B.jpeg

2CE1A86F-316D-49B6-B720-23538C42B749.jpeg

4B80D097-C298-4538-85C3-A32F4C2129DF.jpeg

6A0F9C4A-E500-487D-9E27-5610800F09EA.jpeg
 
The guy you sent them to is talking them up on the VMF. You might get flooded with orders!
 
The guy you sent them to is talking them up on the VMF. You might get flooded with orders!

yeah, got some good initial feedback from him yesterday. Lord knows I need something going on. Paint has been really slow after my best customer died back in the spring...
 
Back
Top