Dne'
Well-Known Member
I'd like to hook up some electrical stuff to 12volt to start checking things. I need to wire my Flaming river column into my already existing circutry. I'm just going to mount my battery under the hood instead of in the trunk(keep it simple). I can mount the solenoid, and connect the wires that came from under the dash, through the firewall, through the radiator support and over to the solenoid. I need to wire in my Classic air conditioning, start connecting things where they belong under the dash. Midlife reworked my under the dash wiring harness, so all should be well there. I just don't want to smoke anything! Im not sure which wires go where on the solenoid. I made a mistake in ordering a 100amp alternator with an internal regulator. I thought I may need it for electric fans. I would like the original alternator and be able to use the regulator that mounts on the firewall. Any quams regarding this?
When I do connect, do i just touch it to the solenoid post and make sure it doesn't spark, like something is not connected correctly? then proceed?
I still have to install my ignition switch.
the only thing that is actually connected is my wiper motor. that was easy.
The headlight switch should be a no brainer
Ignition switch~ no brainer
Any advice would be appreciated!
dne'
When I do connect, do i just touch it to the solenoid post and make sure it doesn't spark, like something is not connected correctly? then proceed?
I still have to install my ignition switch.
the only thing that is actually connected is my wiper motor. that was easy.
The headlight switch should be a no brainer
Ignition switch~ no brainer
Any advice would be appreciated!
dne'