AzPete
Well-Known Member
Hmmmmm.....
http://www.youtube.com/watch?v=WXGYWSIePf4
http://www.youtube.com/watch?v=WXGYWSIePf4
-
Hello there guest and Welcome to The #1 Classic Mustang forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Post Random Pics
- Thread starter FordDude
- Start date
Okay...I'm a believer. Seems to have a shaft drive on the right.
Now lets see him ride it.
Now lets see him ride it.
Last edited by a moderator:
AzPete
Well-Known Member
At least a body sitting on it....
Taken from the pic page...
"Each motor is basically 8 "s1 /KH250" cylinders bolted on to cut up standard casings, with a 8 cyl built up crank, in turn they are bolted to a housing, gear linked and driven thru a BMW road bike gearbox, as the bike is pretty long already it would be difficult to put a transverse drive thru a gearbox. It has taken almost three years of hard work and he has overcome some huge problems to get here - - where do you even start to think about building a bike like this? . . . Oh, by the way, Simon is not an engineer of any kind - he oversees the building of shopping precincts etc
Don't look at it as a bike, look at it as a pure feat of engineering . . . and Simon built a Nitrous injected, fuel injected, water cooled, supercharged H1 about 5 years ago! . . . . How will he top this one? He can't - WHO CAN? I think as you say, his next project may be reverting back to a small engine and gaining the maximum horsepower from it "
"The bike has a small 75cc "Donkey" engine undr the seat to start it."
"The ignition is by 6 x 8cyl E-Type Jaguar distributers."
"Oh, and not only does it run - but it is rideable - JUST! - the engine and box alone weight just over a ton! "
Taken from the pic page...
"Each motor is basically 8 "s1 /KH250" cylinders bolted on to cut up standard casings, with a 8 cyl built up crank, in turn they are bolted to a housing, gear linked and driven thru a BMW road bike gearbox, as the bike is pretty long already it would be difficult to put a transverse drive thru a gearbox. It has taken almost three years of hard work and he has overcome some huge problems to get here - - where do you even start to think about building a bike like this? . . . Oh, by the way, Simon is not an engineer of any kind - he oversees the building of shopping precincts etc
Don't look at it as a bike, look at it as a pure feat of engineering . . . and Simon built a Nitrous injected, fuel injected, water cooled, supercharged H1 about 5 years ago! . . . . How will he top this one? He can't - WHO CAN? I think as you say, his next project may be reverting back to a small engine and gaining the maximum horsepower from it "
"The bike has a small 75cc "Donkey" engine undr the seat to start it."
"The ignition is by 6 x 8cyl E-Type Jaguar distributers."
"Oh, and not only does it run - but it is rideable - JUST! - the engine and box alone weight just over a ton! "
fd
Opentracker
Active Member
A
Anonymous
Guest
My hero.
"70_Fastback" said:
yeah - it my current desktop - large image here:
http://www.pakwheels.com/blog/wp-conten ... -large.jpg
I like that one!
And she's a real cutie!
And she's a real cutie!
A
Anonymous
Guest
Mid, your just not going to get a break.
DEL65
Of The Morons
Last edited by a moderator:
fd
A
Anonymous
Guest
What to FUCK happened to this thread? OK, I'll admit, I do like the obammy thingie, after all "he is" a real dickhead.
dodgestang
Active Member
"67 evil eleanor" said:
It will be ok....just chill
A
Anonymous
Guest
:roul I thought I was on the Thong thread, my bad. Anyway, I'll play along.
A
Anonymous
Guest
LMAO
"67 evil eleanor" said:
You know the penalty...put some pics there.
Fst Blk
Well-Known Member
"67 evil eleanor" said:
That's hilarious.
Bill